To Copy Onto Postcards - Konica Minolta Di1611 Advanced Information

4

To copy onto postcards

As an example, the following procedure describes how to make copies
onto 148 mm × 100 mm postcards loaded into the Manual Bypass.
1
Position the document(s) to be copied.
Refer to "Loading the Document" on page 3-8.
2
Adjust the paper guides for the
Manual Bypass, and load the
postcards.
Load postcards with the shorter
side as the leading edge, as
shown in the illustration.
Note
Load postcards so that the surface to be printed on faces
downward.
With the Manual Bypass, only one postcards can be loaded at a
time.
3
Press the [No] key.
The "PAPER SOURCE SETUP"
menu appears.
4-12
Useful Operations
Di1611/Di2011