To Copy Onto Envelopes (Non-Standard Size) - Konica Minolta Di1611 Advanced Information

Useful Operations

To copy onto envelopes (non-standard size)

As an example, the following procedure describes how to make copies
onto 200 mm × 150 mm envelopes loaded into the Manual Bypass.
Note
When loading non-standard-sized documents and paper, be sure to
first measure their size.
The Document Scales at the edges of the Original Glass are useful for
measuring documents and paper.
1
Position the document(s) to be copied.
Refer to "Loading the Document" on page 3-8.
2
Adjust the paper guides for the
Manual Bypass, and load the
envelopes.
Load the envelopes with the flap
facing up so that the surface to
be printed on faces downward,
as shown in the illustration.
Note
Before loading envelopes, press them down to make sure that all
air is removed, and make sure that the folds of the flaps are firmly
pressed.
With the Manual Bypass, only one envelope can be loaded at a
time.
Di1611/Di2011
4
4-9