Konica Minolta Di1611 Advanced Information page 99

Before Making Copies
7
Using the
keys, select the size of the
paper loaded.
If "OHP" was selected in
step 5, select from the
following four paper size
settings.
"A4 L"
"A4 C"
"Letter L"
"Letter C"
If paper with a non-
standard size is loaded,
press the
("CUSTOM"), and then
use the 10-Key Pad to
enter the paper size. (For
details, refer to "Copying
Onto Various Types of
Media" on page 4-5.)
?
Do you know the size of
FLS paper?
The default FLS size is 210 mm × 330 mm. To change the FLS
size, contact your service representative.
8
Press the [Yes] key.
The main screen appears.
9
If necessary, specify any other copy settings.
Zoom (p. 5-28)
Copy density (p. 5-34)
Advanced Copy Operations (p. 6-1)
10
Press the [Start] key.
Tip
If paper other than plain paper is specified and the Multiple Bypass is
used, the screen changes as shown below.
Di1611/Di2011
and
key
5
5-19