Double-Sided Copying Is Not Possible Under The Following Conditions; To Make Double-Sided Copies Using The Original Glass - Konica Minolta Di1611 Advanced Information

Advanced Copy Operations
Double-sided copying is not possible under the following
conditions:
Double-sided documents are loaded into the Automatic Document
Feeder AF-12.
The Manual Bypass is selected.
Special paper (cards, OHP transparencies, envelopes, or label
sheets) is loaded.
The "PAPER TYPE" function is set to "1-SIDE".
Paper with a width less than 140 mm is selected.

To make double-sided copies using the Original Glass

1
Position the document(s) to be
copied.
Refer to "Loading the Document" on
page 3-8.
For details on loading the
documents into the Document
Feeder, refer to "To make
double-sided copies using the
Document Feeder" on page 6-8.
2
Press the [Copy] key.
The "Duplex" indicator lights up.
3
If necessary, specify any other copy
setting.
Before Making Copies (p. 5-1)
Advanced Copy Operations
(p. 6-1)
4
Using the 10-Key Pad, enter the desired number of copies.
5
Position the first document page,
and then press the [Start] key.
After the document page is
scanned, the message "NEXT
PAGE SCAN=START" appears.
6
Position the second document page, and then press the [Start] key.
After the document page is scanned, a double-sided copy is printed.
Di1611/Di2011
6
6-7