Specifying Machine Settings ("Machine Setting" Menu) - Konica Minolta Di1611 Advanced Information

Utility Mode – Copy Functions
7.2 Specifying Machine Settings ("MACHINE
SETTING" Menu)
From the "MACHINE SETTING" menu, the following machine settings can
be changed.
"MACHINE SETTING" menu:
No. MACHINE SETTING
1 AUTO PANEL
RESET
2 ENERGY SAVE
MODE
3 AUTO SHUT OFF
4 DENSITY (ADF)
5 DENSITY (BOOK)
6 PRINT DENSITY
7 LCD CONTRAST
8 LANGUAGE
Di1611/Di2011
Description
This function can be used to set the length of time until the
auto panel reset operation is performed after copying or the
last operation is finished. When the auto panel reset
operation is performed, the main screen is automatically
displayed.
• The manufacturer's default setting is 1 min.
This function can be used to set the length of time that the
machine is idle before it enters Energy Saver mode.
• The manufacturer's default setting is 15 min.
This function can be used to set the length of time until the
machine automatically turns off after the last operation is
finished.
• The manufacturer's default setting is "OFF".
This function is used to specify the density level when the
optional Document Feeder is used.
Mode 1: For printing lighter copies of dark documents to
avoid darkening of copies.
Mode 2: For printing copies with same density as
documents.
• The manufacturer's default setting is "MODE1".
This function is used to specify the density level when a
document is placed on the Original Glass and copied.
Mode 1: For printing copies with same density as
documents.
Mode 2: For printing lighter copies of dark documents to
avoid darkening of copies.
• The manufacturer's default setting is "MODE1".
The print density can be set to one of five settings.
• The manufacturer's default setting is
This function can be used to adjust the contrast of the
Control Panel display.
• The manufacturer's default setting is
This function can be used to set the language of the display
and the printed reports.
7
.
.
7-3