Konica Minolta Di1611 Advanced Information page 155

Utility Mode – Copy Functions
Note
The paper length is set between
421 mm and 432 mm, the
maximum width that can be set
is 279 mm.
The paper width is set between
280 mm and 297 mm, the
maximum length that can be set
is 420 mm.
?
Have the necessary precautions been observed when entering the
paper size?
Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
6
Using the 10-Key Pad, enter the
paper width (mm).
The paper width can be set
between 90 mm and 297 mm.
If you wish to correct the setting,
press the [No] key, and then
enter the new number.
7
Press the [Yes] key.
The "PAPER SOURCE SETUP" menu appears again.
Di1611/Di2011
421 mm to 432 mm
(Length)
Less than 420 mm
(Length)
x
y
7-17
7