Konica Minolta Di1611 Advanced Information page 173

Utility Mode – Copy Functions
No. COPY SETTING 2
1 MIXED ORIGINAL
2 COPY PRIORITY
3 OUTPUT PRIORITY
4 4IN1 COPY ORDER
5 CRISSCROSS MODE
6 DUPLEX COPY
Di1611/Di2011
Description
This function can be used to set whether or not the
"Mixed Orig." function is selected when the machine
starts up or after the Control Panel is reset.
This function can be set if an optional Document Feeder
is installed.
• The manufacturer's default setting is "OFF".
This function can be used to set whether the automatic
paper or automatic zoom ratio setting is selected when
the machine starts up or after the Control Panel is reset.
• The manufacturer's default setting is "AP" (auto
paper selection).
This function can be used to specify if the selected
Finishing mode is "NON", "SORT" or "GROUP" when
the machine is turned off or the [Panel Reset] key is
pressed.
This function can be set if an optional Document Feeder
is installed.
• The manufacturer's default setting is "NON".
This function can be used to select from the following for
the page order when the 4in1 Copy mode is selected.
"PATTERN1"
1 2
3 4
This function can be set if an optional Document Feeder
is installed.
• The manufacturer's default setting is "PATTERN1".
This function can be used to set whether or not copies
are fed out in a crisscross pattern when the crisscross
output conditions are met.
This function can be set if an optional Document Feeder
and Job Shifter are installed.
• The manufacturer's default setting is "ON".
This function is used to select whether or not double-
sided printing is used.
The optional Duplex Unit must be installed. (Option only
for the Di2011)
• The manufacturer's default setting is "OFF".
7
"PATTERN2"
1 3
2 4
7-35