Konica Minolta Di1611 Advanced Information page 207

Error Messages
Message
PAPER SIZE ERROR
(Flashing
alternately)
RESET PAPER (#XXX)
MEMORY FULL
(Flashing
alternately)
PRESS ANY KEY
PC PRINT
MEMORY FULL
SET PLUG-IN
COUNTER
UPPER TRAY FULL
(Flashing
alternately)
REMOVE PAPER
TRAY MOVEMENT
ERROR
(Flashing
alternately)
PRESS ANY KEY
CALL SERVICE(M1)
CALL SERVICE(M2)
MACHINE TROUBLE
(Flashing
alternately)
(C####)
Di1611/Di2011
Cause
The paper loaded in the paper
tray caused a size error.
"#" indicates the paper tray,
and "XXX" indicates the paper
size.
The size of the data for the
scanned image has exceeded
the capacity of the memory.
The image data received from
the computer has exceeded
the capacity of the memory.
A counter key is not inserted.
If the optional Job Separator is
installed and the paper in the
Upper Copy Tray has reached
the maximum capacity,
printing cannot continue.
The optional Job Separator is
installed and the paper in
either the Upper Copy Tray or
the Lower Copy Tray has
reached the maximum
capacity when the machine is
turned on, when copying
begins, or when starting to
print.
A maintenance is due.
The Imaging Unit should be
replaced.
Some problem occurred in the
machine.
Remedy
Pull open the paper tray with the
size error, and then close it
again.
Check if a custom paper size
has been entered, and correct
the paper size using the
appropriate Utility mode
function.
Press any key, or turn the
machine off, then on again.
(The scanned data should be
cleared from the memory.)
Press any key, or turn the
machine off, then on again.
(The received image data
should be cleared from the
memory.)
Insert the counter key.
Remove all paper from the
Upper Copy Tray of the Job
Separator.
Remove the paper from the
Upper Copy Tray or the Lower
Copy Tray of the Job Separator,
and then press any key.
Contact your service
representative.
Contact your service
representative.
Turn the machine off, then on
again.
If the error is still displayed,
contact your service
representative.
8
8-17