To Set The "Auto Shut Off" Function - Konica Minolta Di1611 Advanced Information

Utility Mode – Copy Functions

To set the "AUTO SHUT OFF" function

Precautions for setting the "AUTO SHUT OFF" function:
Whether or not auto shut-off is possible depends on the "AUTO SHUT
OFF" function in the "ADMIN. MANAGEMENT" menu.
1
Select the "MACHINE SETTING"
menu.
Refer to "To select the
"MACHINE SETTING" menu"
on page 7-4.
2
Press the [3] key from the 10-Key
Pad to select "AUTO SHUT OFF".
If the "AUTO SHUT OFF"
function in the "ADMIN.
MANAGEMENT" menu is set to
"DISABLE", skip to step 4.
3
Using the
"ON", and then press the [Yes] key.
4
Using the 10-Key Pad, specify the
length of time until the machine
automatically turns off, and then
press the [Yes] key.
The timer can be set between
15 min and 240 min.
If you wish to correct the setting, press the [No] key, and then enter
the new number.
The "MACHINE SETTING" menu appears again.
Note
If the Auto Shut Off function is performed and the machine is turned
off, it will no longer be possible to make copies or print from a
computer.
To make copies or print from a computer, turn on the machine.
Di1611/Di2011
and keys, select
7
7-7