5
5.9
Interrupting Copy Jobs
Long continuous copy operations can quickly be paused by pressing the
[Interrupt] key in order to copy a different document.
Note
Some functions cannot be interrupted. In addition, some functions are
not available while a copy job is interrupted. For details, refer to
"Function Combination Table" on page 10-8.
To interrupt a copy job
1
Press the [Interrupt] key. The
Interrupt indicator lights up, and the
current copy operation is paused.
When the [Interrupt] key is
pressed, all functions are reset
to their defaults.
2
Remove the current document, and then load the other document that
you wish to copy.
3
If necessary, specify any other copy settings.
Paper (p. 5-21)
Zoom (p. 5-28)
Copy density (p. 5-34)
Advanced Copy Operations (p. 6-1)
4
Using the 10-Key Pad, enter the desired number of copies, and then
press the [Start] key to copy the other document.
5-36
Before Making Copies
Di1611/Di2011