Konica Minolta Di1611 Advanced Information page 206

8
Message
TONER EMPTY
(Flashing
alternately)
SUPPLY TONER
PAPER EMPTY
(Flashing
alternately)
LOAD PAPER (#XXX)
SET ORIGINAL TO
ADF
REMOVE PAPER
TEXT/P
ä[A]ü#XXX:EMPTY
NO SUITABLE PAPER
(Flashing
alternately)
LOAD PAPER (#XXX)
APS SIZE ERROR
AMS SIZE ERROR
8-16
Cause
The toner is empty. Copying
and printing cannot be
performed.
The selected paper tray has
run out of paper.
"#" indicates the paper tray,
and "XXX" indicates the paper
size.
A document was not loaded
into the Document Feeder
before beginning a copy
function (such as, "2in1"
copying or "Mixed Orig."
copying) that uses the
Document Feeder. Otherwise,
the Document Feeder is lifted
up.
When interrupting a copy job
to perform a different copy
operation other than the "Book
Separation" function, the
document for the interrupted
copy job was left in the
Document Feeder.
×1.00 (While specifying Copy
settings)
The selected paper tray has
run out of paper.
"#" indicates the paper tray,
and "XXX" indicates the paper
size.
• While copying, the size of
the paper in the selected
paper tray has changed.
• While copying documents
with mixed sizes using the
Auto Paper function, paper
of a suitable size could not
be found.
"#" indicates the paper tray,
and "XXX" indicates the
paper size.
While copying using the Auto
Paper function, paper of a
suitable size could not be
found.
While copying using the Auto
Size function, the combination
of the document and paper
sizes caused the zoom ratio to
exceed the range between
×0.5 and ×2.0.
Error Messages
Remedy
Replace the toner bottle with a
new one. ("To replace the toner
bottle" on page 8-2)
Load paper of the specified size
into the specified paper tray.
Load a document into the
Document Feeder.
Securely close the Document
Feeder.
Remove the document from the
Document Feeder.
Either load paper of the
specified size into the specified
paper tray, or press the [Paper]
key and select a different paper
size.
Either load paper of the
specified size, or press the
[Paper] key and select a
different paper size.
Either load paper of a suitable
size, or press the [Paper] key
and select a different paper
size.
Either load paper of a suitable
size, or use the and
keys to specify the zoom ratio.
Di1611/Di2011