To Place The Document On The Original Glass - Konica Minolta bizhub c252 User Manual

Before making copies

To place the document on the original glass

1
Lift open the original cover, or the ADF if it is
installed.
– When placing the document on the original glass,
be sure to lift open the ADF at least 20°. If the
document is placed on the original glass without
the ADF being lifted at least 20°, the correct
document size will not be detected.
2
Place the document so that the side to be
scanned faces down, and then place the page
on the original glass.
– Load the document pages so that the top of the
document is toward the back or the left side of
the machine.
When loading in the v
orientation:
C252
When loading in the w
orientation:
20° 20°
1
1-17