Auto Panel Reset; Energy Save Mode - Konica Minolta Di1611 Advanced Information

2

Auto Panel Reset

With the auto panel reset operation, the Copy mode screen appears after
copying or after a specified length of time has passed after the last
operation is finished. (Manufacturer's default setting: 1 minute)
Tip
The length of time until the auto panel reset operation is performed can
be set to 30 seconds or a setting between 1 and 5 minutes.
In addition, the Auto Panel Reset function can be disabled.
For details, refer to "To set the "AUTO PANEL RESET" function" on
page 7-5.

Energy Save Mode

With the Energy Save mode, the machine automatically enters a standby
mode (Energy Save mode), instead of turning off.
When the machine is in Energy Save mode, the indicator on the [Start] key
remains lit in green, but the display goes off.
Note
If the Auto Shut Off function is activated during Energy Save mode, the
machine turns off.
Conditions for entering Energy Save mode
The [Energy Save] key is pressed.
The specified length of time after the last operation has elapsed.
(Manufacturer's default setting: 15 minutes)
Tip
The length of time until the machine enters Energy Save mode can be
set between 1 and 240 minutes. (Refer to "To set the "ENERGY SAVE
MODE" (preheat mode) function" on page 7-6.)
2-22
Precautions
Di1611/Di2011