Power Supply; To Turn On The Machine; To Turn Off The Machine; Default Settings - Konica Minolta Di1611 Advanced Information

Precautions
2.7

Power Supply

To turn on the machine

Set the Power Switch to "I".
The indicator on the [Start] key lights up
in orange, and the message "PLEASE
WAIT!" appears in the display.
Note
If the [Start] key is pressed while the
indicator is lit in orange, the copy job
is queued. When the indicator on
the [Start] key lights up in green, the
loaded document is scanned and
copies are produced.

To turn off the machine

1
Check that all jobs are finished.
If printed pages remain in the Copy Tray, remove them.
2
Set the Power Switch to "2".

Default Settings

The settings that are automatically selected when the machine is turned
off or the [Panel Reset] key is pressed are called the "default settings".
These settings serve as a reference for all functions.
Copy mode
Number of copies: 1
Copy density: AUTO
Zoom ratio: Full size (× 1.00)
Paper source: AUTO (with the Document Feeder installed)
Finishing function: Non-sort
Tip
The default settings can be customized using the functions in the
Utility mode ("7 Utility Mode – Copy Functions").
Di1611/Di2011
2
2-21