Useful Operations
4.3
Copying Onto Various Types of Media
To copy onto OHP transparencies
As an example, the following procedure describes how to make copies
onto OHP transparencies loaded into the 1st Tray.
1
Position the A4-sized document.
Refer to "Loading the Document" on page 3-8.
2
Adjust the paper guides in the 1st
Tray, and load the OHP
transparencies.
Load OHP transparencies in the
same orientation as the
document.
Note
A maximum of 20 OHP transparencies can be loaded.
3
Press the [Utility] key twice.
The "PAPE SOURCE SETUP"
menu appears.
4
From the 10-Key Pad, press the [2]
key.
"TRAY1 PAPER" appears.
Di1611/Di2011
4
4-5