To Make Copies Using An Erase Setting - Konica Minolta Di1611 Advanced Information

6

To make copies using an Erase setting

1
Load the document to be copied.
Refer to "Loading the Document" on page 3-8.
2
Press the [Erase] key.
The "Erase" indicator lights up.
3
Using the
"LEFT", "UPPER" or "FRAME" to
specify the area that will be erased.
?
Do you know how large an area
is erased?
The width of the erased area for
the "LEFT", "UPPER" and
"FRAME" settings can be set
between 5 mm and 20 mm, in 1 mm increments. The
manufacturer's default setting is 10 mm.
The width of the erased area for the "LEFT", "UPPER" and
"FRAME" settings can be changed using the "ERASE SETTING"
function in the Utility mode ("To specify the erased width ("ERASE
SETTING" function)" on page 7-43).
4
Press the [Yes] key.
The main screen appears.
5
If necessary, specify any other copy settings.
Before Making Copies (p. 5-1)
Advanced Copy Operations (p. 6-1)
6
Using the 10-Key Pad, enter the desired number of copies, and then
press the [Start] key.
6-14
and keys, select
Advanced Copy Operations
Di1611/Di2011