Machine Parameter D:1; Machine Parameter D:2; Machine Parameter D:3 - Muratec MFX-1600 Field Engineering Manual

Machine Parameter B:7
Initial
Switch
Setting
7 0 Leading edge document
margin adjustment
6 0
(ADF)
5 0
4 0
Adjusts the leading edge
3 0
margin from Document
2 0
Sensor 2 (DS2) to the start of
1 0
the scanning position.
0 0
Each setting changes
by 0.085mm.
Note: These values are
factory set and should not be
adjusted unless instructed by
a Muratec technical
representative.
Machine Parameter B:8
Initial
Switch
Setting
7 0 Trailing edge document
margin adjustment.
6 0
(ADF)
5 0
4 0
Adjusts the document feed
3 0
after the trailing edge of a
2 0
document passes
1 0
Document Sensor 2 (DS2).
0 0
Each setting changes
by 0.085mm.
Note: These values
are factory set and should
not be adjusted unless
instructed by a Muratec
technical representative.
Machine Parameter B:9
Adjust
Switch 76543210
Adjust
Switch 76543210
C:9 --- Factory use only
3-11
Usage/Comments
Settings
11111111 -10.80 mm
10000011 -0.26 mm
10000010 -0.17 mm
10000001 -0.085 mm
00000000 0.00 mm
00000001 0.085 mm
00000010 0.17 mm
00000011 0.26 mm
00000100 0.34 mm
00000101 0.43
00000111 0.51 mm
01111111 10.80 mm
Usage/Comments
Settings
11111111 -10.80 mm
10000011 -0.26 mm
10000010 -0.17 mm
10000001 -0.085 mm
00000000 0.00 mm
00000001 0.085 mm
00000010 0.17 mm
00000011 0.26 mm
00000100 0.34 mm
00000101 0.43
00000111 0.51 mm
01111111 10.80 mm