Machine Parameter B:6; Machine Parameter B:7 - Muratec MFX-1600 Field Engineering Manual

Machine Parameter B:3
Initial
Switch
Setting
7 0 FBS scanner registration
adjustment (Horizontal)
6 0
5 0
Adjusts the start point to scan
4 0
the document.
3 0
The plus setting increase the
2 0
left margin and the minus
1 1
setting decrease it.
0 0
Each setting changes by
0.5 mm.
Machine Parameter B:4
Initial
Switch
Setting
7 0 ADF scanner registration
adjustment (Horizontal)
6 0
5 0
Adjusts the horizontal
4 0
scanning range.
3 0
The plus setting increase the
2 0
scanning range and the
1 0
minus setting decrease it.
0 0
If your machine is MFX-1200,
each setting changes by
1.4 mm.
Note: Switch 0 – 3 are not
available for MFX-1200.
Adjust
Switch 76543210
Adjust
Switch 7654
Max. 0011
Min. 1011
3-9
Usage/Comments
Settings
00000111 3.5 mm
00000110 3.0 mm
00000101 2.5 mm
00000100 2.0 mm
00000011 1.5 mm
00000010 1.0 mm
00000001 0.5 mm
00000000 0 mm
10000001 -0.5 mm
10000010 -1.0 mm
10000011 -1.5 mm
10000100 -2.0 mm
10000101 -2.5 mm
10000110 -3.0 mm
10000111 -3.5 mm
Usage/Comments
4.2 mm
0010 2.8 mm
0001 1.4 mm
0000 Initial setting
1001 -1.4 mm
1010 -2.8 mm
-4.2 mm
Maximum
Initial setting
Minimum