5. Open the top cover.
6. Remove five mounting screws holding the rear cover in place. Then remove the rear cover.
7. Remove the shield plate.
8. Connect the RS-232C PCB assembly to the Main control PCB with the connection cable as shown
below: (Connect the cable to the P14D connector on the main PCB.)
9. Insert the RS-232C PCB assembly into the slot. Then use the mounting screw to attach the assembly.
10.Re-attach the shield plate.
11.Re-attach the option cover using its mounting screw.
12. Re-attach the rear cover using five mounting screws.
13. Attach the ferrite core to your RS-232C cable.
14. Connect one end of the RS-232C interface cable to the RS-232C interface port on your fax machine.
Note: Please see next page for more details on the RS-232C cable.
15. Connect the other end of the RS-232C cable to the computer's RS-232C port.
6-5