Unique Switch I:7 - Miscellaneous; Unique Switch J:4 - Rs-232C - Muratec MFX-1600 Field Engineering Manual

Unique Switch i:7 - Miscellaneous

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Print last 25-digit of remote
number on TCR
0: No
1: Yes
Unique Switch i:8
Unique Switch j:4 - RS-232C . . . for RS-232C only
Initial
Switch
Setting
7 0 Adjusts CI counter
6 1
5 0
4 1
3 0 Factory use only
2 0 Factory use only
1 0 Fax reception while scanning
or printing through the RS-
232C
0: No
1: Yes
0 0 Factory use only
Adjust
Determines if printing the "
25-digit of remote number on TCR, when the
remote number exceeded the ability of its column
on TCR.
j:3 --- Factory use only
Adjust
If the remote fax machine disconnects the phone
line before the PC responses the CI signal, the fax
regards that the PC is off and then it will receive
from the next call.
In this case, increase the CI counter to be more
than the number of rings the PC receives.
Switch 3210
To reset this status, first initialise the PC's fax
software and then the fax machine (press Program
key, R, 3, ENTER; see operating instructions for
more detail).
Determines if reject the fax reception or receiving it
instead of the PC, while the PC scans or prints
through the RS-232C.
3-59
Usage/Comments
", followed by the last
Usage/Comments
CI counter
0000 0 time
0001 1 time
0010 2 times
:
0101 5 times Initial setting
:
1110 14 times
1111 15 times