Unique Switch B:8 - Transmission; Unique Switch C:0 - Reception - Muratec MFX-1600 Field Engineering Manual

Unique Switch b:8 - Transmission

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Transmission when disable to
detect first NSF in feeder
transmission.
0: Retry to detect NSF
1: Transmit with the standard
protocol
Unique Switch b:9 --- Factory use only

Unique Switch c:0 - Reception

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 1 Transmit CED signal when
manual/remote receive
0: No
1: Yes
3 1 Pseudo-ring start time
(seconds)
2 0 Switch 3: 0
Switch 2: 0
1 1 Factory use only
0 1 Factory use only
Adjust
Determine the action when disable to detect first
NSF in feeder transmission.
Adjust
Determines if sending CED signal at on-hook
transfer.
Sets the time the pseudo-ring begins after
answering an incoming call.
5 6 8 10 (Fax/Tel Ready or Tel/Fax Ready mode only.)
0 1 1
1 0 1
3-44
Usage/Comments
Usage/Comments