Unique Switch H:0 - Operation; Unique Switch H:1 - Operation - Muratec MFX-1600 Field Engineering Manual

Unique Switch g:8

Unique Switch h:0 - Operation

Initial
Switch
Setting
7 0 First Dialing symbol when
pressing Dialing Options key
0: " "
1: " ! "
6 1 LCD error message
0: Remains in LCD
1: Returns to standby
5 1 Buzzer/keypad volume
OFF
4 0 0
0
3 0 Priority of Speed Dial / Tel
Index key
0: Speed Dial
1: Tel Index
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only

Unique Switch h:1 - Operation

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 RX document to polling
document
0: No
1: Yes
0 0 Factory use only
Unique Switch h:2 --- Factory use only
g:9 --- Factory use only
Adjust
When set to "0", " " will appear first when pressing
Dialing Options key.
When set to "1", " ! " will appear first.
After an error message has printed, the setting of
this switch determines if the error message will
remain in the display.
Low Medium Maximum
0 1 1
1 0 1
When set to "0", Speed Dial index will appear first
when pressing Speed Dial / Tel Index key.
When set to "1", Tel Index will appear first.
Adjust
Retrieve the document received in the memory by
polling transmission.
3-57
Usage/Comments
Usage/Comments