Machine Parameter B:8; Machine Parameter D:0 - Muratec MFX-1600 Field Engineering Manual

Machine Parameter B:5
Initial
Switch
Setting
7 0 FBS scanner registration
adjustment (Horizontal)
6 0
5 0
Adjusts the horizontal
4 0
scanning range.
3 0
The plus setting increase the
2 0
scanning range and the
1 0
minus setting decrease it.
0 0
If your machine is MFX-1200,
each setting changes by
1.4 mm.
Note: Switch 0 – 3 are not
available for MFX-1200.
Machine Parameter B:6
Initial
Switch
Setting
7 0 FBS scanner registration
adjustment (Vertical)
6 0
5 0
Adjusts the end point to scan
4 0
the document.
3 0
The plus setting increase the
2 0
scanning range and the
1 0
minus setting decrease it.
0 0
Each setting changes by
1 mm.
Adjust
Switch 7654
Max. 0011
Min. 1011
Adjust
Switch 76543210
3-10
Usage/Comments
4.2 mm
0010 2.8 mm
0001 1.4 mm
0000 Initial setting
1001 -1.4 mm
1010 -2.8 mm
-4.2 mm
Usage/Comments
Settings
01111111 255.0 mm
:
00000110 6.0 mm
00000101 5.0 mm
00000100 4.0 mm
00000011 3.0 mm
00000010 2.0 mm
00000001 1.0 mm
00000000 Initial setting
10000001 -1.0 mm
10000010 -2.0 mm
10000011 -3.0 mm
10000100 -4.0 mm
10000101 -5.0 mm
10000110 -6.0 mm
:
11111111 -255.0 mm
Maximum
Minimum