Muratec MFX-1600 Field Engineering Manual page 204

9. Re-attach the rear cover of the machine using three mounting screws except two screws at the rear
side.
Note: Do not forget to connect the speaker connector when attaching the rear cover of the machine.
10 Re-attach the rear cover of the second cassette using two screws (3 10 mm) included in the option
cassette box and six mounting screws (3 8 mm) as shown in the illustration.
Note: The remaining two screws (3 8 mm) will be used in next step.
3x10mm screws
11 Pull out the first cassette, and then fix the machine and the second cassette using two screws as
shown in the illustration.
6-24