Muratec MFX-1600 Field Engineering Manual page 121

What you see on the LCD
Memory Overflow
Start Or Cancel
Mirror Carriage Error
Mirror Locked
No Command
No Dept. Code
No Document Stored
No Drum
No Number Stored
No Passcode
No PIN Number
No Report
No Toner Cartridge
Not Allowed in Macro
Other Key Setting
Open Top Cover
Please Remove Paper
What it means/ What to do
During transmission (or copying), you tried to enter more pages into
memory than your fax could store.
Press START to tell your fax to keep as many pages in memory as possible,
or press CANCEL to delete from memory all pages stored during this
operation (but not previous operations).
The mirror carriage of your machine has become inoperable.
The transport mode is not turned off.
Turn off the transport mode.
You pressed REVIEW COMMANDS to review upcoming commands, but
your fax machine had none stored.
You tried to turn on the department code setting but there are no department
codes stored in your fax machine.
Store at least one department code, then try again.
. . . or . . .
You entered incorrect department code at fax sending while the department
feature is on.
Enter correct department code.
You tried to print a document from memory, but your fax machine had none
stored.
The drum cartridge is missing or has not been properly installed in your fax
machine.
Please properly install the drum cartridge.
You selected an autodialer, batch box or F-Code box number for which there
is no fax (or phone) number programmed.
Either choose another number or dial a phone number directly from the
numeric keypad.
You tried to program a security feature, but there's no protection passcode
stored in your fax machine.
Store a protection passcode in your machine, then retry again.
You selected "Mode1" in the pin mask feature and tried to call an autodialer
number in which no PIN has been entered, or to call using numeric keypad
without PIN.
Enter a PIN, then try again.
You requested an activity journal or confirmation report, but your fax machine
has no record of any fax jobs having occurred.
The toner cartridge is missing or has not been properly installed in
your fax machine. Please properly install the toner cartridge.
During macro registration, you pressed the key which cannot be registered in
Macro, such as MONITOR/CALL key or SECURITY RECEPTION key.
You tried to enter the same function which is already stored in other Soft key.
Store the different function.
The paper is jammed in your fax machine.
Open the cover indicated on the LCD, and remove the jammed paper
4-15