Muratec MFX-1600 Field Engineering Manual page 122

What you see on the LCD
Open 1st Side Cover
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover
Reset Document
Please Call Service
Please Replace Drum
Please Replace Toner
Please Supply Paper
Please Wait
Polling In Use
Printer In Use
Protect Doc. Stored
Ration must be 100%
Scanner In Use
SecurityRx is Off
Sub-address In Use
Toner Low
What it means/ What to do
carefully.
Either your document wasn't inserted correctly, or the fax to which you're
sending can't handle the document's page length.
Reset the page and try again.
The printer unit of your fax machine has become inoperable.
See page 4-21.
Your drum cartridge has reached the limit of its design life. Your machine
cannot print until the drum cartridge is replaced.
Please replace the drum cartridge.
Your toner cartridge is empty. Your machine cannot print until the toner
cartridge is replaced.
Replace the toner cartridge.
The paper cassette or bypass tray is out of paper.
Supply paper to the cassette and/or the bypass tray.
Your fax machine's printer is either warming up or busy.
Please wait until the fax is finished printing and then re-try your command or
operation.
You tried to store the polling document in your fax machine, where one
already had been stored.
Wait for the fax to complete the regular polling operation or delete the stored
document, then try again.
The command you're trying to enter requires the use of the printer, which is
already in use.
Wait for the fax to finish printing, then try again.
A received document was in your fax's memory when you tried to turn off the
security reception passcode.
Print the received document from your fax's memory, then retry the desired
operation.
You cannot set the magnification ratio in Negative/Positive copy.
Set the magnification ratio to 100 % to use the Negative/Positive copy.
The command you're trying to enter requires the use of the scanner, which is
already in use.
Wait for the fax to complete the scan, then re-try the desired command.
You tried to turn the security reception on using a Soft key which is assigned
to set the security reception to on or off, but security reception setting has not
set to on.
To turn on or off the security reception using a Soft key, first set the security
reception setting to on.
You tried to enter a sub-address identical to one already being used in
another F-Code box.
Enter a different sub-address.
Your fax machine is almost out of toner.
4-16