Communication Error Messages - Muratec MFX-1600 Field Engineering Manual

Communication Error Messages

The error messages on Check Message printouts indicate the following:
Here's a brief summary:
Error Message
Check condition of remote fax.
Repeat transmission.
Line is busy.
Check received documents.
Memory full.
Dialing number is not set.
Stopped.
(Message area is blank)
Possible Meanings
Remote machine malfunctioned
No handshake signals from remote machine
Wrong phone number reached
Poor phone line conditions prevented
communication
No handshake signals from remote machine
Document missfeed or miscount
Unable to reach remote machine after attempting
specified number of redial
Remote machine was busy
Remote machine didn't answer
Receive confirmation signal not received from
remote machine
Poor line conditions caused a poor image
Remote unit's memory capacity has been exceeded
An autodialer number is not stored programmed
properly
The STOP key was pressed at the remote fax
during the handshake
Someone pressed STOP during communication
Printer error occurred during communication
4-20