Unique Switch C:2 - Reception; Unique Switch C:3 - Reception - Muratec MFX-1600 Field Engineering Manual

Unique Switch c:2 - Reception

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Receive the junk fax
0: Yes
1: No
1 0 Factory use only
0 0 Call request when remaining
memory size is small
0:No
1:Yes

Unique Switch c:3 - Reception

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Number of seconds pseudo-
ring rings (seconds)
0 0 Switch 1:
Switch 0:
Unique Switch c:4
Adjust
When the block junk fax feature was set to Mode 2
and the fax does not receive the TSI signal from the
remote fax, determines if receiving the fax other
than the remote fax number set to the block junk
dial list.
Setting this switch to "1" prompt call request to
transmitter when remaining memory size is small
after receiving the document which not the last
page.
Adjust
Sets the length of time the pseudo-ring rings.
30 40 50 60
0 0 1 1
0 1 0 1
c:9 --- Factory use only
3-46
Usage/Comments
Usage/Comments