TOP FRONT COVER / TOP RIGHT COVER / TOP LEFT COVER
1. Open the platen cover.
2. Remove the screw covers.
3. Remove the three top front cover mounting screws, and then remove the TOP FRONT COVER.
4. Remove the two top right cover mounting screws, and then remove the TOP RIGHT COVER.
5. Remove the two top left cover mounting screws, and then remove the TOP LEFT COVER.
Screw cover
Top Rear Cover
Harness holder
Screw cover
Top Right Cover
Screw cover
Top Left Cover
Top Front Cover
TOP REAR COVER
Perform the procedure of step 1 through 6 in "CONNECT SCANNER PCB," page 5-18.
HARNESS HOLDER
Perform the procedure of step 1 through 4 in "CONNECT SCANNER PCB," page 5-18.
5-7