Table of Contents
Advertisement
Load Operations
The load operations operate in the direction
Source –> RAM where the source can be Floppy
disk or Hard disk.
Have a disk ready containing the data you wish
to load. These can be SK760/880 format disks,
disks of previous formats, such as WX or SX
Series, and MIDI file disks. If you are working
with the Hard Disk, press DISK and select the
HARD DISK option with soft button F2 and pro-
ceed from point 3 below.
THE GENERAL LOAD PROCEDURE
1. Insert the floppy disk into the drive.
2. Press DISK to open the main Load page.
If the main Load page is not shown, use the
left page scroll button (
3. Specify the load operation required (example,
Load SingleSong) then press ENTER to open the
File Selector.
From here, proceed as described for the Load
operations on the pages which follow.
NOTE: All Load Single operations also fea-
ture a SEARCH RESOURCE function which
allows you to search for a single element
(Block, Sound, Real Perf, Style Perf, User
Style, Song, MIDI File). How to use the
Search Resource is explained at the end of
this chapter.
4. When you have finished, press DISK (or ESCAPE
three times) to exit «Disk».
) to open it.
1
2
3
4
or
Disk & Hard Disk 3•7
Advertisement
Table of Contents
