Transposing Tracks By Octaves - GEM Powerstation SK760 Owner's Manual

TRANSPOSING TRACKS BY OCTAVES

Any track, if selected, can be instantly transposed
in octave steps, within the range 5 octaves.
1. Select the track you wish to transpose.
2. Press the OCTAVE + to raise the octave setting.
An insertion screen shows the current Oc-
tave setting.
Press the OCTAVE + button as many times
as necessary until you reach the desired set-
ting. The value is expressed in semitones:
12 = 1 octave, 24 = 2 octaves, etc.. The in-
sertion screen cancels automatically after 2/
3 seconds.
3. Press OCTAVE – button to lower the octave
setting.
The current Octave setting is shown.
Continue pressing the OCTAVE – button as
many times as necessary until you reach the
desired setting. An eventual positive Octave
status will be cancelled.
To clear the Track Octave setting
4. Press both OCTAVE buttons simultaneously.
The insertion screen shows the value of "0"
and the track's normal pitch is restored.
2•10 User Guide
1
2
OCTAVE
C5 C6
C4 C5
C3 C4
3
OCTAVE
C4 C5
C3 C4
C2 C3
4
OCTAVE