Table of Contents
Advertisement
HARD DISK RESTORE
Use the HARD DISK RESTORE function to load
backup data from floppy disk back into the Hard
Disk.
How to restore backup data to the Hard disk
1. Insert the Floppy disk containing the backup file
or files into the drive.
2. Select Hard Disk Restore and press ENTER to ac-
tivate the function.
The floppy disk may contain more than one
backup file (shown with the ".AR" extension),
3. Select the file to restore to the Hard disk and
press ENTER to confirm.
Confirming the backup file selection opens a
second level display showing the Floppy disk
directory on the left and a column on the right
where you can prepare a list of backup data
to decompress.
Hard Disk Restore - list
3•34 Reference Guide
4. Prepare a list containing the block(s) to restore.
Select a Block with the Up/Down cursor ar-
rows and press ENTER to insert it into the
list.
The cursor moves down to the next empty
location automatically.
Repeat the operation for other blocks
If you attempt to insert a Block that has al-
ready been inserted, an appropriate warning
is displayed. Press ESCAPE to cancel the
warning and select a different Block.
5. Press EXECUTE to start the hard disk restore proc-
ess.
When the Hard Disk restore procedure is fin-
ished, a message is displayed saying:
"Operation completed".
If the Hard disk restore procedure requires
more than one disk, a dialogue apppears re-
questing the insertion of disk n. 2 and so on..
Delete (F5)
Select DELETE (F5) to cancel a block from the
list.
The Delete option does not cancel a Block from
the Restore directory.
Reset (F6)
Select RESET (F6) to cancel a list containing two
or more Blocks in a single step.
Select All (F7)
Use Select All (F7) to select all the Blocks con-
tained in the Restore directory.
Execute (F8)
Press EXCECUTE (F8) to start the restore proc-
ess.
Advertisement
Table of Contents
