14 • Preload - GEM Powerstation SK760 Owner's Manual

14 • Preload
Use the PRELOAD button to play all the Songs
or MidiFiles present a disk.
1. Insert a SK760/880 Songs disk or MidiFile data
disk into the drive.
Check the disk label for the type of data con-
tained in the disk.
2. Press PRELOAD.
SK760/880 Starts to scan the disk contents
ten loads the first Song or MIDI File on disk
into the instrument's Songs memory.
Shortly after, the Song (or MIDI File) starts to
play back. During the playback, the second
Song on disk is loaded (in background) to
the Songs memory.
N.B. The PRELOAD function exploits the first
two locations in Song memory, while all other
locations are automatically cancelled if oc-
cupied.
When the first Song or MidiFile ends, a sec-
ond sequence begins (there will be a short
pause while the second song is accessed).
Playback continues non-stop until all the
Songs or MidiFiles on disk have been played.
When the last Song or MidiFile reaches the
end, playback stops automatically.
3. Stop the playback at any time by pressing STOP
or START/STOP.
Playback stops instantly.
1
2
3
Or
User Guide 2•47