Table of Contents
Advertisement
•
Forced stop: the Song starts at the point in-
dicated by the locator and stops at the speci-
fied End.
•
Loop: the Song starts at the point indicated
by the locator, stops at the End, then repeats
from the Starting point. The loop repeats con-
tinuously until stopped with the Stop button.
Start
Determines the start measure and can be modi-
fied only if the Play mode is set to «Loop». If
Loop is selected, this parameter indicates the
starting point of the loop. Modify this parameter
when it is in a selected state, or when the Song
has already been recorded, by rotating the DIAL.
End
Determines the end measure and can be modi-
fied only if the Play mode is set to «Forced stop»
or «Loop». If Loop is selected, this parameter
indicates the point at which the sequence ends
before looping back to the Start locator. If Forced
stop is selected, it indicates the automatic Stop
point.
This parameter can be modified when it is in a
selected state by rotating the DIAL.
Time Signature (programmable with an empty
Song)
This parameter can only be modified before re-
cording the Song.
Start Tempo (programmable when the Song is off)
Determines the starting tempo of a Song. This
parameter can be modified when the Song is off.
The value of the setting is recorded in the Master
Track, as the Start Parameter .
Song memory (not programmable)
Shows the Song dimensions expressed in Kilo-
bytes. Each Song is limited to 400 kb of memory,
independent of the memory remaining in the Sys-
tem RAM.
6•4 Reference Guide
Play view Soft buttons
JUKEBOX... (F1)
Recalls the Jukebox function (explained after-
wards).
OPTION... (F2)
Metronome options.
Countdown - activates a one measure lead
into the recording of a sequence during which
events cannot be captured. Options: On, Off.
Metr. volume - Sets the metronome volume.
Options: Off, 10...127.
SOUND VIEW (F5)
Recalls the «Sound View» page, where you can
see and change the sounds of the current Per-
formance.
PLAY VIEW (F6)
Recalls the «Record View» page, where you can
control the record/playback parameters.
ERASE... (F7)
Track or Song erase parameter.
Track- Cancels the selected track.
Song - Cancels all tracks (all Song) leaving
an empty Song, ready to start another record-
ing.. The Song-Performances are not can-
celled.
METRONOME (F8)
Activates/deactivates the metronome.
Advertisement
Table of Contents
