Table of Contents
Advertisement
CREATE TRACK (F5)
This parameter is valid only when the instrument
is set to Song Mode.
Creates a track with default values. Use this func-
tion to create Song Performances with more than
16 tracks. Pressing the Soft button F6 opens the
«Create Track» dialog window:
Procedure:
1. Press F5 (Create track).
2. Specify the number of the track to create with
the DIAL or numeric keypad. If the track that
you specify already exists, the relative pa-
rameters are assigned default values.
3. Press ENTER to confirm or ESCAPE to can-
cel.
COPY TRACK (F6)
Copies one track to another. The destination track
assumes all the programmed settings of the
source track.
Press the corresponding Soft button to open the
«Copy track» dialog window.
14•6 Reference Guide
Procedure:
1. Select the track to copy.
2. Press F6 (Copy track).
3. Specify the number of the track to copy with
the DIAL or numeric keypad.
4. Press ENTER to confirm the copy or ES-
CAPE to cancel the operation. The settings
of the source track are copied to the destina-
tion track.
Note: This operation does not copy the notes
captured by the sequencer but only the settings
such as sound, transposition, pan. To copy the
notes, use the «Copy events» function (in «Edit
Style» or «Edit Song»).
ERASE TRACK (F7)
This parameter is valid only when the instrument
is set to Song Mode.
Cancels the selected track.
Procedure:
1. Select the track to cancel. A track engaged
by the sequencer cannot be erased.
2. Press F7 to cancel the track.
You are prompted to confirm the operation:
3. Press ENTER to confirm or ESCAPE to can-
cel.
Note: This command is valid for Song mode.
In Style/RealTime mode, it is not possible to cancel
tracks.
Note: It is not possible to cancel track that
contains note information. If a track shows the
seq-play or mute icon with notes, it cannot be
cancelled.
Hint: Cancel Song tracks that are not used.
The resulting Song file will occupy less memory on
disk.
Advertisement
Table of Contents
