GEM Powerstation SK760 Owner's Manual page 354

Hide thumbs Also See for Powerstation SK760:
Table of Contents

Advertisement

(1)Exclusive Status
(2)manufacturer ID=GENERAL MUSIC
(3)Command ID(3=RealTime) + device ID (1=2 device ID)
(4)Set Subfunction
(5)Model ID (0=WK4)
(6)c=1(Yes checksum),f=0(7 bit data value)
(7)EOX
The checksum value is obtained with an XOR of all the bytes starting from the GeneralMusic ID (2FH) included; using ^ as the
operator XOR ( OR Exclusive ), then:
cc=checksum = 2F ^ 31 ^ 01 ^ 00 ^ 10 ^ 0A ^ 1C ^ 00 ^ 4D = 54
the message to send is:
F0 2F 31 01 00 10 0A 1C 00 4D 54 F7 .
< Example 3 > : Setting the M.Transpose to -6 using common channel 2, format 0 (7 bit data value) with and without checksum.
According to the address map relating to the Global Parameters - GLOBSET the address is 00 09 02H (transpose) and the
value to set is 24-6=18=12H; therefore the set stream without checksum is as follows:
F0
2F 31
01
00
(1)
(2) (3)
(4)
(5)
(1)Exclusive Status
(2)manufacturer ID=GENERAL MUSIC
(3)Command ID(3=RealTime) + device ID (1=2 device ID)
(4)Set Subfunction
(5)Model ID (0=WK4)
(6)c=0( No checksum),f=0(7 bit data value)
(7)EOX
with the checksum, the stream will be:
F0 2F 31 01 00 10 00 09 02 12 16 F7 .
< Example 4 > : setting the parameter FltCutoff of the group AUDIOIN1 to 147 ( >127 ) on command channel 2 and format 2
( data in nibble ) with and without checksum.
According to the address map relating to Global Parameters - AUDIOIN1 the address is 00 0B 05H (FltCutoff) and the value to
set in nibble format is, 09 03H; infact 147=93H, therefore the value is sliced in two nibbles 9 and 3 obtaining 09 03H; therefore
the set stream without checksum is as follows:
F0
2F 31
01
00
(1)
(2) (3)
(4)
(5)
(1)Exclusive Status
(2)manufacturer ID=GENERAL MUSIC
(3)Command ID(3=RealTime) + device ID (1=2 device ID)
(4)Set Subfunction
(5)Model ID (0=WK4)
(6)c=0 ( No checksum), f=2 (nibble)
(7)EOX
with the checksum, the stream will be:
F0 2F 31 01 00 12 00 0B 05 09 03 09 F7 .
< Example 5 > : To know the value of the parameter HighGain of the Equalizer using common channel 9 and format 0 (7 bit data
value).
According to the address map relating to the Global Parameters - EQUALIZER the addrress is 00 00 01H (HighGain) and the
size is 00 00 01H; therefore, the get stream is as follows:
A•30 Appendix
00
00 09 02
12
F7
(6)
address
data (7)
02
00 0B 05
09 03 F7
(6)
address
data (7)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerstation sk880Wk4Sk760Sk880Wk6Wk8

Table of Contents