Table of Contents
Advertisement
«Play view» parameters
The main page of Song mode («Play View») con-
tains position pointers and performance control
parameters.
SONG VIEW/PLAY VIEW
You can opt to see the Song in «Play View» mode
in order to modify the playing parameters, or in
«Sound View» mode in order to see the sounds
assigned to the tracks of the current Song-Per-
formance. You can pass from one mode to an-
other by pressing the corresponding Soft button
(F5 or F6).
«Sound View» page
«Play View» page
Tempo
Metronomic Tempo. The value represents the
playing speed (beats per second) at the current
song position. During the playback, the Tempo
can be modified with the DIAL.
The [i] or [e] symbols, shown after the tempo value,
are an indication of the status of the synchronizing
MIDI clock: [i] = internal (SK760/SK880) or [e] =
external (external sequencer connected to the
SK760/SK880 MIDI IN). The synchronization is
programmed in «Edit MIDI», «General settings»
page.
Note: The starting tempo can be changed by
modifying the Master Track in «Edit Song», or by
using the DIAL in «Play View». The selected value
remains in memory.
Locator (Song position pointer)
This section shows the current Song position
expressed in measures and beats. When the
Song is not playing, the Locator can be modified
in the «Play View» page in order to select a start-
ing point for the playback. It can be also modi-
fied with the [<<] and [>>] buttons regardless of
the status of the sequencer (playing or off).
Locator (programmable)
Repeats the same information of the locator
shown in the status bar, but also contains the
sequencer resolution (or 'tick').
When the sequencer is off, the three parts can
be individually modified (if selected) by rotating
the DIAL.
Play/Rec mode
There are three Play or Record options to choose
from:
•
Linear: the Song starts at the point indicated
by the locator and stops at the natural Song
end.
Songs 6•3
Advertisement
Table of Contents
