Table of Contents
Advertisement
3. Prepare a list containing the block(s) to backup.
Select a Block with the Up/Down cursor ar-
rows and press ENTER to insert it into the
list.
The cursor moves down to the next empty
location automatically.
Repeat the operation for other blocks
If you attempt to insert a Block that has al-
ready been inserted, an appropriate warning
is displayed. Press ESCAPE to cancel the
warning and select a different Block.
4. Press EXECUTE to start the backup process.
See EXECUTE below.
Overwrite (F1)
Select OVERWRITE (F1) if you want to overwrite
data on disks previously used for other backups.
This function is selected by default.
Deselect this function if you want the backup
floppies to retain any data currently stored in
them.
Compress (F2)
Select COMPRESS (F2) to compress the files of
the backup list.
This function is selected by default.
Delete (F5)
Select DELETE (F5) to cancel a block from the
list.
The Delete option does not cancel a Block from
the Hard Disk directory.
Reset (F6)
Select RESET (F6) to cancel a list containing two
or more Blocks in a single step.
Select All (F7)
Use Select All (F7) to select all the Block con-
tained in the Hard disk
Execute (F8)
• Press EXECUTE (F8) to start the backup process.
After a short period, the unit is ready to
backup the data and a dialog appears re-
questing you to insert Disk n. 1:
• Insert a disk into the drive and press ENTER to
start saving to the disk.
When the Backup has finished, a message
is displayed saying:
"Operation completed".
If the Backup procedure requires more than
one disk, a dialogue appears requesting the
insertion of disk n. 2 and so on..
Disk & Hard Disk 3•33
Advertisement
Table of Contents
