GEM Powerstation SK760 Owner's Manual page 274

BALANCE (F1)
Valid for Dual 3 and Dual 4 Algorithms only.
The Balance parameters
Balance Balances the Volume of the two os-
cillators of the current layer.
Positive values render the first Wave-
form louder, negative values en-
hance the second Waveform.
Assignable values: –127 ... +127.
Balance dyn. Links the Balance response to key
sensitivity velocity variations.
Positive values enhance the pres-
ence of the first Waveform with in-
creased key velocity while negative
values enhance the presence of the
second Waveform with increased
key velocity.
Value range: –7 ... +7.
0 = no response.
Balance touch Links the Balance response to
sensitivity aftertouch variations.
Positive values enhance the pres-
ence of the first Waveform with in-
creased Aftertouch pressure while
negative values enhance the pres-
ence of the second Waveform with
increased Aftertouch pressure.
Value range: –7 ... +7.
0 = no response.
BALANCE TRACKING (F2)
Balance Tracking allows you to program a Bal-
ance offset, or the variation of the Balance (pro-
grammed in the Balance page) across the key-
board.
For information regarding how to program the
SEGMENT option (1, 3, 6 Segments) and the
tracking parameters (Point, Key, Level), refer to
the Volume Tracking example on the previous
page.
16•14 Reference Guide
Edit Sound - Dual 3 configuration showing Balance Editor
Edit Sound - Balance parameters
Edit Sound - Balance tracking curve (1 segment)