Table of Contents
Advertisement
LOC
Locator. Indicates the current position of the
Song, expressed in measures, beats and reso-
lution (tick).
measure (bar)
The measure can be modified with the DIAL. It
is not possible to select the next measure after
the Song end point. For example, if the recorded
Song terminates at measure 10, the Locator can-
not be given a value greater than 10 -1 -1.
PLAY/REC MODE
Recording and playback options for the Song.
The options are:
Linear - A linear recording or playback of the
Song, starting from the current locator to the
Song end. In record mode, new events are
recorded as the recording proceeds.
Forced stop - The Song is played back or
recorded from the current Locator to a speci-
fied End locator. With Forced Stop active, the
Loc and End indicators determine the start
and end point of the recording.
Loop - Song playback or recording repeats
continuously. When the Song reaches the
end, it loops back to the beginning and starts
again and continues to repeat until stopped
with STOP.
Note: The loop requires an additional memory
buffer. When this mode is selected, the memory
progress bar shows an increased amount of used
memory .
START
Starting indicator. If Loop is active (Play/Rec
Mode= Loop) this parameter indicates the point at
which the Song starts to repeat. The parameter
can be modified with the DIAL.
beat
resolution
END
End point marker. If Loop is active (Play/Rec
Mode= Loop) this parameter indicates the point
at which the repeating song ends before looping
back to the Start marker. If the Play/Rec
Mode=Forced Stop, this parameter indicates the
automatic Stop point.
The parameter can be modified with the DIAL.
TIME SIGNATURE
Metro. This parameter can be modified only be-
fore starting a recording. If the Song contains
recorded events, the parameter cannot be modi-
fied.
TEMPO
Initial playing/recording speed. The parameter
can be modified with the DIAL in the «Play View»
or «Record View» page, or in the Master Track.
Tempo changes can be carried out during the
recording by using the DIAL. The events are
captured in the Master Track, provided that the
appropriate option is active («Controls rec», dia-
log window F3).
The Master Track always contains the initial
Tempo of the Song. The value can be modified
but not cancelled.
Recording a Song 6•11
Advertisement
Table of Contents
