Table of Contents
Advertisement
PLAY SONGS USING JUKEBOX
The Jukebox function chains the songs of your
choice and plays them back as a 'medley' with a
single command.
1. With the Song «Play View» page showing, press
F1 («Jukebox...») to access the Jukebox display.
The left part of the display shows the list of
Songs in memory. The right part shows the
Jukebox list.
The negative highlight cursor shows which
song is selected in the Song list. The frame
on the right shows the destination in the Juke-
box list.
Pass from left to right and vice versa with the
directional arrows.
2. Select a Song from the left part to include in the
Jukebox list and press the INSERT soft button
(F5) (or ENTER) to insert the Song in the list.
The right part of the display shows the name
of the Song added to the list and the frame
advances one step automatically.
3. Repeat the procedure for other Songs and press
INSERT (or ENTER) each time to compile the list.
If you want to substitute one of the names in the
Jukebox list, move the cursor to the right part of
the display, select the name to change; move
the cursor back to the left part, select the Song
to insert and press INSERT or ENTER.
Take the cursor to the right and select a new
location for the next Song. Return to the left
part and carry out the selection.
4. Press F8 («Execute») to start the playback of the
Jukebox list.
The Play View page of the Song appears and
the status bar shows the indication: «Juke-
box active».
You can interrupt the Jukebox at any time with
STOP.
1
2/3
4
User Guide 2•55
Advertisement
Table of Contents
