Table of Contents
Advertisement
11 • The Digital Signal Processor (DSP)
SK760/880 allows you to route the Performances (RealTime, Style and Song) to the on-board multi-
effects processor to enrich the sounds with Reverb and Modulation effects. The DSP consists of four
real time controlled units which process the Performances with Reverbs and Delay/Modulation effects:
two Reverb channels (A & B) and two Modulation channels (A & B) are available.
In Style/RealTime mode, channel A effects are reserved for the keyboard tracks and channel B for the
accompaniment tracks. Each track can be processed by two effects. When a Style is selected with the
SINGLE TOUCH PLAY button off, only the effects assigned to the accompaniment tracks will change
(Group B). When a Performance is selected with STYLE LOCK on, only the effects assigned to the
keyboard will change (Group A).
In Song mode, each track can be independently processed by either A or B channel effects.
Access to the DSPs is via the EFFECTS button in the Edit section. Press the EFFECTS button and (if
necessary) press ENTER to access the Effects editor to open the main Edit Effect page showing the
Effect Type function currently selected. The status of the parameters on this page depends on the
current mode (Style/RealTime or Song).
CHANGE THE EFFECT ASSIGNED TO A
PERFORMANCE
1. Press the EFFECTS button in the EDIT section.
The first time you enter, the Edit Effect Menu
appears with the "Effect" editor selected
(other editors may or may not be available
depending on the configuration of your instru-
ment).
2. With the Effect editor selected, press ENTER or
the right PAGE SCROLL button to access the Ef-
fect Type page.
The Effect Type page shows the effects and
relative Effect Volume levels assigned to the
current Performance.
2•36 User Guide
1
2
OR
Advertisement
Table of Contents
