Chapter 13 • Edit Controllers/Pads; Wheels - GEM Powerstation SK760 Owner's Manual

• 13 Edit Controllers/Pads
In «Edit Controllers/Pads» you can program how
the individual tracks of a Performance react to
the Trackball, the programmable Pedals and pro-
grammable Pads.
Press the CNT./PADS button in the EDIT section
to gain access to the «Edit Controller/Pads" en-
vironment.
Note: Save the changes with STORE
PERFORMANCE. The Performances memorize
the pages whose icon shows the symbol
WHEELS (F1)
Activates the action of the Wheels for single
tracks.
Each track can be independently programmed
for the action of the Pitchbend Wheel (1) and/or
the Modulation Wheel (2).
PitchBend 1
Pitch Bend is applied by vertical movements of
Wheel 1 (the left wheel). The PitchBend wheel
is spring loaded to return the control to the cen-
tral position (corresponding to standard pitch).
The parameter offers a maximum pitch excursion
of 12 semitones and Off.
The same control can be assigned to a continu-
ous control pedal. See "Pedals Programming
(F2)" .
Modulation
Modulation is applied by vertical movements of
.
Wheel 2 (the right wheel). The Modulation Wheel
is centre-dented for easy positioning at the cen-
tral position. The parameter can be set to either
On of Off.
The same control can be assigned to a switch
action pedal. See "Pedals Programming (F2)" .
Options: Pitch Bend: Off, 1...12.
Modulation: Off, On.
Edit Controllers/Pads - Wheels
Pitch/Mod assignment for each track
Edit Controllers/Pads 13•1
2
Performance
Track in edit