GEM Powerstation SK760 Owner's Manual page 281

BALANCE ENVELOPE KEY ON & KEY OFF
The Balance Key On and Key Off Envelopes are
10 segment curves (maximum).
The Key On envelope represents the variation of
the Balance for the entire duration that the notes
are held pressed while the Key Off Envelope, the
variation of the Balance after the notes have been
released.
ZOOM (F7)
Using the ZOOM option, you can enlarge the field
of vision of the envelope up to 4 times at a se-
lected Point.
Pressing the soft button repeatedly selects the
Zoom options in cyclic order (1, 2, 3, 4, 0). Zoom
0 corresponds to "actual size".
USING THE SEGMENT OPTION
Add segment insert a new segment immediately af-
ter the currently selected segment.
A maximum of up to 10 segments is
permitted.
Del segm cancels the current segment.
Loop segm loops the current segment (envelope
repetition). When it reaches the ter-
minal point, it loops back to the be-
ginning. The cycle repeats continu-
ally until key release. The initial Loop
point is represented by an arrow.
To eliminate the loop, select the seg-
ment and select "del segm.".
3 display parameters, selected with the cursor
buttons, define the Key On Amp. Envelope.
Segment Allows you to select the segments
with the Dial. The one selected cor-
responds to the flashing terminal
point.
Time Determines the duration of the Seg-
ment. The maximum segment time
is approximately 21 seconds.
Assignable values: 0 ... 127.
Level Sets the Balance level of the seg-
ment at its terminal point. The val-
ues are relative and represent the
enhancement of one oscillator with
respect to the other.
Assignable values: -50 ... 0... +50.
For details of how to program the Balance Key
On & Key Off Envelopes, refer to the Amplitude
Envelope example on page 16. 18.
Edit Sound - Balance Key On envelope, Zoom 3
Edit Sound - programmed Balance Key Off envelope, Zoom 2
Edit Sound 16•21