The «Record View» Page In Detail - GEM Powerstation SK760 Owner's Manual

Hide thumbs Also See for Powerstation SK760:
Table of Contents

Advertisement

The «Record View» page in detail
Mode... (F1)
Opens the «Record Mode» dialog window where
you can select various recording options.
Replace - The new notes substitute "old"
notes already present in the tracks being re-
corded.
Overdubb - New notes are merged with
those already present in the tracks being re-
corded.
Punch In/Out - A means of inserting a cor-
rection without repeating a recording. Punch
recording is activated by pressing an appro-
priately programmed pedal (in «Controllers/
Pads» of «Edit Performance»).
Activate the recording with PLAY. When the
song reaches a position just before the point
at which the correction must be inserted,
press the pedal. At this point, the recording
proceeds in "replace" mode. When the cor-
rection is complete, release the pedal to stop
the replace recording.
Option... (F2)
Metronome options.
Countdown - A lead into the recording dur-
ing which time no events can be captured..
Settings: On, Off.
Metronome vol. - Volume setting of the met-
ronome tick. Settings Off, 10...127.
Controls rec... (F3)
Recording options for Tempo, Master Volume,
effects changes. These events are captured in
the Master Track.
Tempo - To record the Tempo variations.
Settings: On, Off.
P.Volume. - To record the general Volume of
6•10 Reference Guide
the instrument using the Volume pedal .
These events are recorded as CC07 (see Ap-
pendix). Settings: On, Off.
Effect - To record the changes of the effects
assigned to the Performance and respective
effect volume levels. These events are cap-
tured as CC16, CC17, CC48, CC49 (see
Appendix). Settings: On, Off.
Select all tracks (F4)
Select all tracks (F4)
Once pressed, the option changes to «Deselect
all tracks».
Activates all the tracks for recording. «Deselect
all tracks» resets all the tracks in «key-play» or
«seq-play» status.
Sound View (F5)
Recalls the «Sound View» page in which it is
possible to see and change the sounds assigned
to the Performance.
Rec View (F6)
Recalls the «Record View» page in which it is
possible to control the record/play parameters.
Erase... (F7)
Cancellation of the track or Song.
Track - Cancels the selected track.
Song - Cancels all the tracks (entire Song)
and leaves an "empty" Song, ready to cap-
ture recorded events. The Song Performance
remains intact.
Metronome (F8)
Activates/deactivates the metronome.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerstation sk880Wk4Sk760Sk880Wk6Wk8

Table of Contents