Table of Contents
Advertisement
Clock send
Determines whether or not the SK760/880 MIDI
Clock is transmitted to external MIDI devices. If
deactivated, SK760/880 cannot control the tempo
and the Start/Stop of MIDI devices connected to
the SK760/880 MIDI OUT.
Options: On, Off.
MIDI Merge
Enables data received at MIDI IN to be merged
with data transmitted at MIDI OUT.
If Merge=Off, the data received at MIDI IN are
directed to the internal sound engine and to MIDI
THRU.
If Merge=On, the data received at MIDI IN are
directed to the internal sound engine, to MIDI
THRU and MIDI OUT. Unlike data sent from MIDI
THRU, the data transmitted via MIDI OUT are
processed by the tracks (volume, pan, transpose,
velocity curve, MIDI filters).
Options: On, Off.
Note: The parameter cannot be programmed
when the COMPUTER port is active («Computer»
editor of «Edit General»).
MIDI IN Transpose
Enables the transposition of data received at MIDI
IN. Deactivating this parameter can be useful to
avoid unwanted transpositions when you program
Songs with a computer.
A computer operates as a THRU device. After
receiving data by a SK760/880 track which has
been transposed, the computer can return the
notes to the same track which will transpose them
further. This will not occur if MIDI IN Transpose
is deactivated.
Options: On, Off.
11•4 Reference Guide
MIDI IN fix velocity
Enables the Velocity switch. If this parameter is
set to OFF, notes are received via MIDI IN with
the correct velocity value. Other values set the
indicated value to the notes received.
Options: Off, 1 ... 127.
Hint: Some accordions transmit velocity at a
fixed level, not able to be regulated. With this
parameter, it is possible to modify the velocity
value received by the accordion.
System Exclusive
Enables the transmission and reception of sys-
tem exclusive messages. System Exclusive data
control the editing parameters of the instrument,
and can cause radical changes in the way SK760/
880 works. These messages are widely used in
the most recent MIDI files, to send editing mes-
sages before the start of a Song.
Options: On, Off.
Note: To transmit and receive system
exclusive messages, connect both MIDI IN and
MIDI OUT of SK760/880 to the MIDI OUT and MIDI
IN respectively of the external sequencer
(commonly known as the «Closed MIDI Loop»
connection).
System Exclusive Channel
Sets the MIDI In and Out port and MIDI channel
for system exclusive transmissions. The default
setting is MIDI ports A and channel 1.
SMF Save format
Set the function to format 0 or format 1 when you
save SK760/880 Songs as MIDI files.
Options: 0, 1.
Advertisement
Table of Contents
