Table of Contents
Advertisement
6. Select
the
«Quantize» parameter to modify the pre-
quantization (auto-correction of timing errors)
during the recording phase.
7. If necessary,
select «Play/
Rec Mode» to
alter the Song Play/Rec mode:
• The Linear option causes the Song to play
or be recorded once only, from the beginning
to the point at which you press STOP.
• The Forced Stop option causes the song
to play or be recorded from the specified start
locator to the end locator.
• The Loop option allows you to play or record
in a cyclic manner from the Start point to the
End point.
8. If
necessary,
modify the Start
and End locators.
These parameters can be modified only if the
Song contains recorded data (it will not be
possible to specify the measures if no re-
corded events exist).
The Start locator can be modified only when
the Play/Rec mode is set to Loop. The End
locator can be modified only if the Play/Rec
mode is set to Forced Stop or Loop.
Song Mode - Sound View display
(Sounds display)
6•8 Reference Guide
9. Select the track(s) to record and set it (them)
for recording. Only tracks marked by the
record icon will capture data and be heard:
To place all the tracks in record, press F4
(«Select all tracks»). All the tracks will be
activated for recording and the parameter
changes to «Deselect all tracks».
10. To change sounds, select the «Sound View»
option by pressing F5.
After assigning your Sounds, save the Per-
formance with STORE PERFORMANCE.
Press F6 («Rec View») to return to the «Rec
View» page.
11. Activate the metronome with F8 («Metro-
nome»).
Advertisement
Table of Contents
