Table of Contents
Advertisement
Expand... (F3)
Extends the programmed parameters of the note
in edit to a specified keyboard zone.
1. Select the note whose parameters require copy-
ing.
2. Press F3 («Expand...»).
The «Expand» dialog window opens:
3. With the «From» parameter selected, rotate the
DIAL, or play a note to specify the lowest note of
the required keyboard zone.
4. Pass to the «To» parameter with the cursor but-
ton . Rotate the DIAL, or play a note to specify
the highest note of the required keyboard zone.
5. Press ENTER to confirm the Expand command,
or ESCAPE to cancel.
Confirming extends the programmed param-
eters of the original note to the specified key-
board zone.
15•8 Reference Guide
Compare... (F4)
ON/OFF switch. When active, the original pa-
rameter values of the Drumkit/Sound Patch in edit
are temporarily recalled in order to compare them
with the current edited ones.
Restore (F6)
This option restores the original Sound Patch or
cancels the last modifications applied after sav-
ing to the Performance.
1. Press F6 to open the following dialog window:
2. Select the function required with the directional
arrows and press ENTER to confirm or ESCAPE to
cancel to abort.
S.P. Performance - Restores the Drumkit/
Sound Patch in edit to its original status (can-
cels all editing operations applied to all notes).
Current edit - Cancels the current modifica-
tions and recalls the last saved parameter
settings of the Drumkit memorized in the
Performance.
Store... (F8)
This option allows you to save the modifications
to a Performance or creates a new Drumkit/
Sound Patch file that can be used by any Per-
formance.
To conserve the modifications, save them before
selecting a Performance. Selecting a Perform-
ance before saving cancels all modifications ap-
plied.
Advertisement
Table of Contents
