Table of Contents
Advertisement
PROGRAMMABLE EVENTS AND PARAM-
ETERS
The «Status» column shows the type of event.
One or more parameters can be modified for each
event. The table shown opposite lists the events
and parameters which can be modified.
START PARAMETERS (F1)
Enters the edit of the Song's start parameters.
Press F1 again to return to the edit of the suc-
cessive parameters.
SHOW... (F2)
Recalls a dialog window where it is possible to
select the events that will be displayed by the
Event List.
Set the events that you want to mask to OFF.
INS: (X) (F3)
Inserts the specified event type at the cursor po-
sition. To position the inserted event precisely,
modify its locator (the parameters to the left of
the Status).
7•18 Reference Guide
STATUS
VALUE
TEMPO
Metronomic Tempo. If the
Tempo Rec option is enabled
during the recording, all tempo
variations are recorded.
[20 ... 250]
PERFORMANCE Change of Performance
[1 ... 8]
VOLUME
Volume variation via MIDI
(through the Common channel)
or by means of the Volume
Pedal. Does not record
Volume changes made with the
M.VOL slider.
[0 ... 127]
EFF. DEVICE
Selection of a DSP device.
SEL.
Corresponds to CC18.
EFF. TYPE
Type of effect assigned to the
selected DSP. Corresponds to
CC48. The tables of the
assignable effects are in the
Appendix.
EFF. DEVICE
General Effect Volume of the
VOLUME
effect type assigned to the
DSP. The Effect Sends
(amount of effect applied) for
each track is regulated in the
Microscope by means of the
Control Change messages
CC91 & CC93.
Advertisement
Table of Contents
