Modem Setup - Multitech MultiAccess MA30120 User Manual

Communications server
Hide thumbs Also See for MultiAccess MA30120:
Table of Contents

Advertisement

Modem Setup

The Modem Setup group of menus configure the modems for usage with RAS, modem sharing, and faxing.
The default usage for each modem is RAS. The Modem Setup menu controls the parameters of the modems
set to RAS. If the MultiAccess modems are to be used for dialout, in a networking modem sharing
environment, then use the Modem Usage menu to change the usage to Modem Sharing. If the MultiAccess
modems are to be used for faxing with the integrated Hylafax™ Server, then use the Modem Usage menu to
change the usage to Fax. The Fax Setup menu is used to configure the Hylafax Server for sending and
receiving faxes.
The MultiAccess modems also support faxing with fax servers that are external to the MultiAccess via the
Note:
Modem Sharing usage.
Modem Usage
If you are using all your MultiAccess modems to provide dial-in PPP access, you do not have to modify the
default Modem Usage settings. The default usage is RAS. If you plan to use all or part of your MultiAccess
modems for dial-out, you will have to change the Modem usage settings for the selected modems to one of the
Modem Sharing options that best fit your needs. If you plan to use some or all your modems for faxing, you will
have to change the Modem Usage setting for the selected modems to Fax.
If you are using your MultiAccess in an RAS inbound PPP environment, you do not
have to make any changes in the Modem Usage menu.
When implementing a combination of usage options, care must be given so that inbound calls do not
Note:
conflict with outbound calls. This may require changing the hunt group call distribution at the central office and
should be addressed with the provider of your T1/E1 digital line.
Modem sharing is accomplished by implementing a Telnet interface to the MultiAccess modems.
Caution:
Make sure that care is taken to secure access to these ports via firewall or IP filter settings to prevent
unauthorized use of your modem resources.
MultiAccess Communications Server MA30120 User Guide
Chapter 2 – Installation
21

Advertisement

Table of Contents
loading

Table of Contents